In order to prevent the machine from rusting, we will wipe some oil on it.Need to refill the active parts of refueling machine once a day, to ensure that the machine running light, no noise, improve work efficiency, extend the service life.
Adjustment of needle spacing
Because the sewing material is different must adjust the needle pitch, when choosing the needle length, only need to screw the needle pitch screw loose, in choosing the needle to be short time, conversely upward move, can.
Adjustment of pressure foot pressure
When the pressure must be increased, the pressure must be tightened, and the tension of the tension spring will be increased, and the pressure of the foot will be increased.
Adjustment of the location of the sotto: many people can’t draw the line, the reason is that the position is wrong.
When output spindle is to take off the line, the tail end of the shuttle must aim at the needle groove, the gap from a lot, misplacing of spindle position, not timing will be adjusted, loosen the loose piece with screw rod links, moving rod, can make the tail end of the spindle on the needle groove, then tighten the screw.
The adjustment of the needle bar up
In the stage of needle, needle hole should be on the spindle bottom plane, or it should be adjusted, method is to loosen the screw on the small connecting rod shaft, move the needle bar to the right position to tighten again.
- 【Easy to Assemble】It has long life-span and work high efficiency with no noise.The walking foot works well, and being able to sew in any direction by turning the foot is really handy.
- 【Nylon Line】This machine can only be used with nylon line, sewing thickness is 3mm and thick of line 0.2mm,the needle need number 14 to 20.The distance between the needles can be regulated, and the width is about 0.25-0.33cm.
- 【Widely Use】Can sewing different material shoe by nylon or cotton wire.(Such as cloth shoes , rubber shoes , leather shoes , sneakers , high heels , as well as raincoats , leather bags , cloth , trousers, or other leather products.
- 【Use and Maintenance】Mending shoes machine parts need to go once a day, can guarantee the machine running light, no noise, especially the shuttle tank must be in a bobbin, add oil, lest produce post and wear and tear, improve work efficiency, prolong service life.
- 【We Are】Guarantee the quality is the basic rule.WUPYI is dedicated to providing quality services, quality products and fast delivery(US WAREHOUSE). Any question,please contact us.